Freedom Designs Freedom CGX - Manual (Page 24)

FREEDOM DESIGNS, INC. 2241 Madera Rd. Simi Valley, CA. 93065 800-331-8551 Fax 888-582-1509
www.freedomdesigns.com
22
Main Frame
Angle Adjustable Footboard
1. To attach the footboard to the frame, place the f o o t
board clamps on the frame. Set the clamps at the
desired height. Insert the receiver into the clamps
and tighten the 2 hex head screws on each side.
2. To remove the footboard for transfer, unscrew the
knob assemblies underneath the receivers. Lift the
footboard upward, out of the receivers.
3. To attach the footboard after transfer, align the
footboard fittings into the receivers. Turn the knobs
on each side to tighten.
4. To change the angle of the footboard, use an allen
wrench and loosen the flat head screws on the top of
the footboard. When the desired angle or depth is
reached, tighten both screws.