Freedom Designs Freedom CGX - Manual (Page 28)

FREEDOM DESIGNS, INC. 2241 Madera Rd. Simi Valley, CA. 93065 800-331-8551 Fax 888-582-1509
www.freedomdesigns.com
26
CGX Folding Back
The Freedom CGX™ comes standard with a
folding back.
1. To fold the back down, pull upward on the
trigger while pushing backposts forward
toward seat.
2. To place the backpost to the upright position,
pull backposts up until trigger snaps into
place.
Note: The backposts fold down completely when
using a solid seat and back. When using a sling
seat and back the backposts will only fold
Adjustments
Backpost Angle Adjustment
The angle and depth of the backposts may be
adjusted independently. To adjust the back
angle, remove the top screw (A). Tilt the back to
the desired angle, aligning holes in the back
hinge with threaded holes in back mount bracket.
Re-install screw and tighten securely.
Backpost Depth Adjustment
Remove (2) screws, washers and nuts (B). Slide
back hinge assembly to the new position, aligning
holes in mount bracket with holes in frame tube.
Re-install hardware and tighten securely.
Flip Arm / Locking Arm
To adjust height of armrests, loosen and remove
the bolts and nuts holding the arm to the
backpost tube. Align holes in arm with holes in
backpost tube at desired height. Reassemble
with bolts and nuts.
A
B
Pull Up