Freedom Designs Freedom CGX - Manual (Page 25)

23
05/15/08
Angle Adjustable Footboard…….
5. To change the height of the footboard on
the frame, loosen the 2 hex head screws
on footboard frame clamps. Set the desired
height and tighten.
Warning:
In all footplate and hanger adjustments, be sure
that all screws are tightened securely for your
safety.
Individual Flip Up Footplates
Adjustment of the individual flip-up footplates are
as follows:
1. The individual footplates easily flip by lifting
from underneath the footplate to flip up or
push down on the footplate to flip down.
2. To adjust the height of the footplate :
Remove the hex head screws on the side of
the hanger. Seat the footplate at the desired
height. Insert the screws through the corre
sponding holes in the hanger tube and tighten.
3. To adjust the angle of the flip-up footplate,
loosen the lock nuts under the footplate.
Set the foot plate at the desired angle and
retighten nuts.
Quick Release Axle
The Freedom CGX™ is equipped with double lock
quick release axles that release with the push of a
button. This double lock quick release mechanism
allows the large drive wheels to be easily removed
for transportation or storage.
To remove the rear wheel:
1. Unlock the wheel lock.
Steps 1 & 2
Step 3
Main Frame