Setting the date and time, Replacing the quartz date battery, Oe>o o – Canon eos rebel g User Manual
Page 27: Coo ® ’dc i, 0c in, Cd)® o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
II!. Self-Timer and Quartz Date (QD model only)
Setting the Date and Time
To set or change the date and time, follow the procedure below:
j u r u
h — D n .
U C L L
-l Press the MODE button to display
■ the date or time to be set.
Q Press the SELECT button so that
^ the digit to be changed blinks.
Keep pressing the SET button until
the correct number appears.
Press the SELECT button until
none of the digits blink. This sets
the new date or time.
Replacing the Quartz Date Battery
When the quartz date display panel looks faded, replace the CR2025
lithium battery as follows. Battery life is about 3 years.
H Open the camera back and loosen
the screw to remove the battery
compartment cover as shown in
2 Take out the battery.
O Insert a new battery with the
^ positive contact facing you. Then
reattach the battery compartment
Close the camera back and set the
^ correct date and time.