Quick start guide, 0 load the film, Focus the subject – Canon eos rebel g User Manual
Page 5: Take the picture, 0 unloading the film
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Quick Start Guide
0 Load the film.
Align the edge of the film leader with the
orange mark on the camera and dose the
camera back until it snaps shut. The film will
then advance to frame 1 automatically.
Focus the subject.
Aim the focusing point (□
□
□) on the
subject and press the shutter button lightly to
autofocus.
^ Take the picture.
Press the shutter button completely to take
the picture.
0 Unloading the film.
At the end of the roll, the film rewinds
automatically. Open the camera back and
remove the film cartridge.
Advertising