Feature availability table, Af modes and film advance modes, A'dep – Canon eos rebel g User Manual

Page 60

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Feature Availability Table

Autofocus

Focusing Point Selection

Film Advance

Metering Mode

Flash_____

Command

Dial Mode One-

Shot AF

Al Servo

AF

Auto

Manual

Single

Continuous

Evaluative

Center-

weighted
averaged

Partial

Automatic

Firing

Manual

a

*

9

:-i-

A

Pi

p

0

O

(•}*

Tv

O

O

(•)*

Av

o

o

(•r

M

o

0

(•)*

A'DEP

(•>*

#: Set automatically, O: User-selectable. * Available only while the partial metering button is pressed.

One-Shot AF: The exposure setting (shutter speed and aperture) is set when focus is

achieved. The picture cannot be taken unless the subject is focused.

Al Focus AF: Normally, One-Shot AF is set. However, if the subject starts to move, the

camera detects the subject’s movement and switches to Al Servo AF

automatically. The exposure setting is set right belore the picture is taken.

Al Servo AF:

In this mode, the camera focuses continuously. Suited for a moving subject.

The exposure setting is set right before the picture is taken.

Continuous advance: This is for taking continuous shots. While the shutter button is held

down, the camera can shoot continuously as fast as 1 frame per

second.

Evaluative metering: The difference in the brightness level between the subject and

background, subject size, etc., are taken into account to set a suitable
exposure setting.

Partial metering: The exposure setting is based on the brightness of the area covered by the

partial metering circle on the viewfinder screen.

Centerweighted averaging metering; The metering is weighted at the center and then

averaged for the entire scene.

AF Modes and Film Advance Modes

Film Advance Mode

One-Shot AF

Al Servo AF

Single

jv !■?-"; _~'T-

The shutter cannot be released until focus

is achieved, When focus is achieved, AF is
locked. In the evaluative metering mode,

the exposure setting (set right before the

picture is taken) is also locked.

Autofocus tracks the moving subject, and
the exposure setting is set when the shutter

is released,

Continuous

The same conditions above apply during
continuous shooting. (At about one frame
per second.)

The same conditions above apply during
continuous shooting. Autoiocusing operates

during continuous shooting, (At about one
frame per second.)

Advertising