BMW ActiveHybrid 750Li 2011 - Manual (Page 112)

2. Press the controller.
The backup camera image is displayed. The set‐
ting is stored for the remote control currently in
use.
Malfunction
Depending on the vehicle's equipment, the
screen mask can also be turned by 90°.
A Check Control message, refer to page 87, is
displayed in the instrument cluster.
On the Control Display, the areas in front of and
behind the vehicle are shaded. PDC has failed.
Have the system checked.
To ensure full operability:
▷ Keep the sensors clean and free of ice.
▷ When using high-pressure washers, do not
spray the sensors for long periods and main‐
tain a distance of at least 12 in/30 cm.
Surround View*
The concept
Surround View includes the following systems:
▷ Backup camera, refer to page 112
▷ Side View, refer to page 114
.
▷ Top View, refer to page 115 .
It assists the driver when parking, maneuvering
and on blind driveways and intersections.
Backup camera*
The concept
The backup camera provides assistance in park‐
ing and maneuvering backwards. The area be‐
hind the vehicle is shown on the Control Display.
System limits
Check the traffic situation as well
Check the traffic situation around the ve‐
hicle with your own eyes. Otherwise, an accident
could result from road users or objects located
outside the picture area of the backup cam‐
era.◀
Detection of objects
High, protruding objects such as ledges
may not be detected by the backup camera.◀
Switching on automatically
Select transmission position R with the engine
running.
The backup camera image is displayed if the
system was switched on via the iDrive.
Switching off automatically
The system switches off and the LED goes out:
▷ After approx. 33 ft/10 m when driving for‐
ward.
▷ After approx. 9 mph/15 km/h when driving
forward.
Switch on the system again if necessary.
Switching on/off manually
Press the button.
Seite 112
112
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
Driving comfort