Moonroof (if so equipped) -44, Automatic moonroof -44 – NISSAN 2011 Altima Hybrid - Owner's Manual User Manual

Page 125

Advertising
background image

AUTOMATIC MOONROOF

The moonroof will only operate when the ignition
switch is placed in the ON position. The auto-
matic moonroof is operational for about 45 sec-
onds, even if the ignition switch is placed in the
ACC or OFF position. If the driver’s door or the
front passenger’s door is opened during this
period of about 45 seconds, power to the moon-
roof is canceled.

Sliding the moonroof

To fully open the moonroof, push the switch
toward

1

.

To fully close the moonroof, push the switch
toward

2

.

To open or close the moonroof part way, push the
switch in any direction while the moonroof is
sliding to stop it in the desired position.

Tilting the moonroof

Close the moonroof by pushing the switch
toward

2

. Release the switch, then push

the switch toward

2

again to tilt the

moonroof up.

To tilt the moonroof down, push the switch
toward

1

.

WARNING

In an accident you could be thrown from

the vehicle through an open moonroof.
Always

use

seat

belts

and

child

restraints.

Do not allow anyone to stand up or

extend any portion of their body out of
the moonroof opening while the vehicle
is in motion or while the moonroof is
closing.

CAUTION

Remove water drops, snow, ice or sand

from the moonroof before opening.

Do not place heavy objects on the

moonroof or surrounding area.

Resetting the moonroof switch

The moonroof switch may not operate properly
and need to be reset if any of the following
conditions have occurred:

● the moonroof has been manually moved,
● the moonroof motor has been removed and

reinstalled after the moonroof has been re-
positioned or adjusted,

● the moonroof glass panel has been adjusted

or changed, or

● the electrical supply interrupted and/or

some malfunction has been detected.

Use the following reset procedure to return the
moonroof operation to normal.

1. Place the ignition switch in the ON position.

2. Push

and

hold

the

moonroof

switch

toward

2

. Once the moonroof has

reached the full tilt position, release the
switch. Push and hold the switch toward

WIC1559

MOONROOF (if so equipped)

2-44

Instruments and controls

Advertising