Changing wheels and tires -40 – NISSAN 2011 Altima Hybrid - Owner's Manual User Manual

Page 381

Advertising
background image

CHANGING WHEELS AND TIRES

Tire rotation

NISSAN recommends rotating the tires
every 7,500 miles (12,000 km).

See “Flat tire” in the “In case of emer-
gency” section of this manual for tire re-
placing procedures.

As soon as possible, tighten the
wheel nuts to the specified torque
with a torque wrench.

Wheel nut tightening torque:

83 ft-lb (112 N·m)

The wheel nuts must be kept tight-
ened to specifications at all times. It
is recommended that wheel nuts be
tightened to specification at each
tire rotation interval.

WARNING

After rotating the tires, check and

adjust the tire pressure.

Retighten the wheel nuts when

the vehicle has been driven for
600 miles (1,000 km) (also in
cases of a flat tire, etc.).

Do not include the spare tire in

the tire rotation.

For additional information re-

garding tires, refer to “Important
Tire Safety Information” (US) or
“Tire

Safety

Information”

(Canada) in the Warranty Infor-
mation Booklet.

1.

Wear indicator

2.

Location mark

Tire wear and damage

WARNING

Tires should be periodically in-

spected for wear, cracking, bulg-
ing or objects caught in the tread.
If excessive wear, cracks, bulging
or deep cuts are found, the tire(s)
should be replaced.

WDI0258

WDI0259

8-40

Maintenance and do-it-yourself

Advertising