Jump starting -16, Drive belt -16 – NISSAN 2011 Altima Hybrid - Owner's Manual User Manual

Page 357

Advertising
background image

The Hybrid vehicle uses a special 12-

volt battery. If the 12-volt battery needs
to be replaced, use a battery of the
same design. Using the wrong battery
can cause hydrogen gas to build up in
the vehicle, which could lead to an ex-
plosion and personal injury.

When working on or near a battery, al-

ways wear suitable eye protection and
remove all jewelry.

Battery posts, terminals and related ac-

cessories contain lead and lead com-
pounds. Wash hands after handling.

Keep battery out of the reach of

children.

JUMP STARTING

If jump starting is necessary, see “Jump starting”
in the “In case of emergency” section of this
manual. If the Hybrid System does not start by
jump starting, the battery may have to be re-
placed. Contact a NISSAN dealer.

1.

Auto tensioner pulley

2.

Water pump

3.

Idler pulley

4.

Crankshaft

WARNING

Be sure the ignition switch is in the OFF or
LOCK position before servicing drive belt.
The engine could rotate unexpectedly.

1. Visually inspect the belt for signs of unusual

wear, cuts, fraying or looseness. If the belt is
in poor condition or is loose, have it replaced
or adjusted by a NISSAN dealer.

2. Have the belt checked regularly for condi-

tion and tension in accordance with the
maintenance

schedule

found

in

the

“NISSAN Service and Maintenance Guide”.

LDI0581

DRIVE BELT

8-16

Maintenance and do-it-yourself

Advertising