Towing load/specification -19 towing safety -19 – NISSAN 2011 Altima Hybrid - Owner's Manual User Manual

Page 404

Advertising
background image

TOWING LOAD/SPECIFICATION

TOWING LOAD / SPECIFICATION

UNIT: lb (kg)

MAXIMUM TOWING

LOAD

1,000 (454)

MAXIMUM TONGUE

LOAD

100 (45)

TOWING SAFETY

Trailer hitch

Choose a proper hitch for your vehicle and trailer.
Make sure the trailer hitch is securely attached to
the vehicle, to help avoid personal injury or prop-
erty damage due to sway caused by crosswinds,
rough road surfaces or passing trucks.

WARNING

Trailer hitch components have specific
weight ratings. Your vehicle may be ca-
pable of towing a trailer heavier than the
weight rating of the hitch components.
Never exceed the weight rating of the
hitch components. Doing so can cause
serious

personal

injury

or

property

damage.

Hitch ball

Choose a hitch ball of the proper size and weight
rating for your trailer:

● The required hitch ball size is stamped on

most trailer couplers. Most hitch balls also
have the size printed on the top of the ball.

● Choose the proper class hitch ball based on

the trailer weight.

● The diameter of the threaded shank of the

hitch ball must be matched to the ball mount
hole diameter. The hitch ball shank should
be no more than 1/16” smaller than the hole
in the ball mount.

● The threaded shank of the hitch ball must be

long enough to be properly secured to the
ball mount. There should be at least 2
threads showing beyond the lock washer
and nut.

Sway control device

Sudden maneuvers, wind gusts, and buffeting
caused by other vehicles can affect trailer han-
dling. Sway control devices may be used to help
control these affects. If you choose to use one,
contact a reputable trailer hitch supplier to make
sure the sway control device will work with the
vehicle, hitch, trailer and the trailer’s brake sys-

tem. Follow the instructions provided by the
manufacturer for installing and using the sway
control device.

Class I hitch

Class I trailer hitch equipment (receiver, ball
mount and hitch ball) can be used to tow trailers
of a maximum weight of 2,000 lb (909 kg).

You may add Class I trailer hitch equipment that
has a 2,000 lb (909 kg) maximum weight rating to
the vehicle, but your vehicle is only capable of
towing the maximum trailer weights shown in the
Towing Load/Specification chart earlier in this
section.

CAUTION

Do not use axle-mounted hitches.
The hitch should not be attached to or

affect the operation of the impact-
absorbing bumper.

Do not modify the vehicle exhaust sys-

tem, brake system, etc. to install a
trailer hitch.

To reduce the possibility of additional

damage if your vehicle is struck from
the rear, where practical, remove the
receiver when not in use.

Technical and consumer information

9-19

Advertising