Jump starting -14, Variable voltage control system -14, Caution – NISSAN 2014 JUKE - Owner's Manual User Manual

Page 295

Advertising
background image

8-14

Maintenance and do-it-yourself

SDI1480C

1. Remove the cell plugs

*

A

.

2. Add distilled water up to the UPPER LEVEL

*

1

line.

If the side of the battery is not clear, check
the distilled water level by looking directly
above the cell; the condition

*

1

indicates

OK and the condition

*

2

needs more to be

added.

3. Tighten cell plugs

*

A

.

Vehicles operated in high temperatures or under
severe conditions require frequent checks of the
battery fluid level.

JUMP STARTING

If jump starting is necessary, see “Jump starting”
(P.6-8). If the engine does not start by jump
starting, the battery may have to be replaced.
Contact a NISSAN dealer.

CAUTION

. Do not ground accessories directly

to the battery terminal. Doing so will
bypass the variable voltage control
system and the vehicle battery may
not charge completely.

. Use electrical accessories with the

engine running to avoid discharging
the vehicle battery.

The variable voltage control system measures
the amount of electrical discharge from the
battery and controls voltage generated by the
generator.

VARIABLE VOLTAGE CONTROL
SYSTEM

Advertising