NISSAN 2013 Quest - Quick Reference Guide - Manual (Page 13)

3 rD rOw SeaT aDJuSTMeNTS
To adjust the angle of the seatback, pull the strap
on the seatback
01
and lean back. Release the
strap at the desired angle.
for more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
01
11 To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
auTOMaTIC DrIVe POSITIONer (if so equipped)
Two positions for the driver’s seat and outside mirrors
can be stored in the automatic drive positioner
memory.
follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (ParK) position.
• Place the ignition switch in the ON position.
• Adjust the driver’s seat and outside mirrors to the desired positions using the adjusting
switches for each feature.
• Push the SeT switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your niSSAn intelligent key ® .
for more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.