NISSAN 2013 Quest - Quick Reference Guide - Manual (Page 24)

CruISe CONTrOL
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/OFF
switch
01
. The CruISe indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the
desired speed, push the COaST/SeT switch
02
and release. Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the aCCeL/reS switch
03
. When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COaST/SeT switch 02
. Release
the switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CaNCeL switch 04
.
To turn off cruise control, push the ON/OFF switch 01
. The CruISe indicator light in the
instrument panel will turn off.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
uSB/IPOD ® INTerFaCe (if so equipped)
The uSB input jack 01
is located in the center console.
When a compatible uSB memory device or iPod ® is
plugged into the uSB jack, compatible audio and video
files stored on the device can be played through the
vehicle’s audio system and front display.
for more information, refer to the “Monitor, heater, air conditioner, audio,
phone and voice recognition systems (section 4)” of your Owner’s Manual.
01
02
03
04
18
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
first drive features
01