NISSAN 2013 Quest - Quick Reference Guide - Manual (Page 27)

SYSTeM OPeRATinG TiPS
close all windows. Surrounding noises may interfere with system operation and performance.
Press the or
button on the steering wheel to activate voice recognition.
Wait for the tone before speaking.
Begin speaking a command within 5 seconds of the tone.
Speak in a clear and natural voice without pausing between words.
Look straight ahead and avoid speaking too loudly or too softly.
To go back to the previous command, say “Go back”.
To cancel a voice recognition session, say “exit” or press and hold the or
button.
To interrupt the system voice and give a command quickly, press the or button.
When speaking Phonebook names, please be aware some phones require the last name to be
spoken before the first name. for example, “Michael Smith” may be spoken as “Smith Michael”.
To increase or decrease the volume of the voice prompts, push the volume control switches
or on the steering wheel or turn the VOL/ON•OFF control knob on the audio system
while the system is responding.
Voice commands can be used to operate various Bluetooth System features using the
NISSAN Voice Recognition system.
See your Owner’s Manual for detailed information.
if the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used to hear a list of available commands at any time.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth phone.
Bluetooth ® System with Navigation* (if so equipped)
cOnnecTinG PROceduRe
nOTe: The vehicle must be stationary when connecting
the phone.
1. Press the button on the steering wheel and select
the “connect Phone” key.
*Some jurisdictions prohibit the use of cellular telephones while driving.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi
21