NISSAN 2013 Quest - Quick Reference Guide - Manual (Page 14)

OuTSIDe MIrrOr CONTrOL SwITCH
To select the right or left side mirror, turn the control
switch
01
right or left.
To adjust the mirror angle, move the control switch
01
up, down, right or left.
To prevent accidentally moving the mirror, turn and
set the switch to the middle “neutral” position.
ReVeRSe TiLT-dOWn feATuRe (if so equipped)
When backing up the vehicle, the right or left outside mirror can be selected to automatically
turn downward to provide better rear visibility.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the r (reVerSe) position.
3. choose the right or left outside mirror by operating the outside mirror control switch 01
.
4. The outside mirror surfaces move downward.
When one of the following conditions has occurred, the outside mirror surfaces will return to
their original positions.
• The shift lever is moved to any position other than r (reVerSe).
• The outside mirror control switch is set to the center “neutral” position.
• The ignition switch is pushed to the OFF position.
for more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
STarTING/STOPPING THe eNGINe
depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the ACC mode.
• If the ignition is pushed a second time, the vehicle
will enter the ON mode.
Press the ignition switch STarT/STOP button to
start the engine.
nOTe: it is important to make sure the niSSAn intelligent key ® is with you (that is, in your pocket
or purse).
TuRninG THe enGine Off
Move the shift lever to the P (ParK) position and apply the parking brake.
Press the ignition switch STarT/STOP button to turn the engine off.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
12
first drive features
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi