NISSAN 2013 Quest - Quick Reference Guide - Manual (Page 4)

arOuND VIew™ MONITOr (if so equipped)
With the ignition switch in the ON position, the Around
View™ Monitor is activated by pressing the CaMera
button
01
, located on the control panel, or by moving
the shift lever to the r (reVerSe) position.
The monitor displays various views of the position of
the vehicle.
When the shift lever is in the P (ParK), N (NeuTraL) or D (DrIVe) position and the
CaMera button
01
is pressed, the following views will display in order:
01
When the shift lever is in the r (reVerSe) position and the CaMera button 01
is
pressed, the following views will display in order:
Start from any control Panel screen
Rear view & bird’s-eye view
front view & front-side view
Press
Press
Press
Press Press
front view & bird’s-eye view
Rear view & front-side view
for information regarding how to access additional viewing cycles, please see your
Owner’s Manual.
The colored guide lines on the display screen indicate vehicle width and approximate distances
to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).
2
new system features
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi