NISSAN 2013 Quest - Quick Reference Guide - Manual (Page 15)

HeaDLIGHT CONTrOL SwITCH
HeAdLiGHT cOnTROL
Turn the headlight control switch to the
position
01
to turn on the front parking, side marker, tail, license
plate and instrument panel lights. Turn the switch to the
position
02
to turn on the headlights.
AuTOLiGHT SYSTeM (if so equipped)
The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the auTO position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF, 01
or position 02
.
HiGH BeAM SeLecT
Push the headlight control switch forward
04
to
select the high beam function. The blue indicator
light illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
Pull and release the headlight control switch
05
to
flash the headlight high beams on and off.
fOG LiGHT SWiTcH (if so equipped)
nOTe: The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
for more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
04
03
02
05
06
13
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi