NISSAN 2015 Versa Note - Owner's Manual - Manual (Page 160)

Backing up behind a projecting object
The position
᭺
C is shown farther than the position
᭺
B in the display. However, the position
᭺
C is
actually at the same distance as the position
᭺
A .
The vehicle may hit the object when backing up to
the position
᭺
A if the object projects over the
actual backing up course.
ADJUSTING THE SCREEN
The procedure for adjusting the display settings
of the screen differs depending on the type of
screen present on the vehicle.
For vehicles without Navigation System
1. Firmly apply the brake and place the shift
lever in R (reverse)
2. Press the ENTER/SETTING button.
3. The screen will display the Brightness set-
tings.
4. Turn the TUNE/SCROLL knob to adjust the
setting up or down.
5. Press the ENTER/SETTING button again to
display Contrast settings.
6. Turn the TUNE/SCROLL knob to adjust the
setting up or down.
7. Press the ENTER/SETTING button to com-
plete the adjustment.
● Do not adjust the display settings of the
RearView Monitor while the vehicle is mov-
ing.
For vehicles with Navigation System
1. Firmly apply the brake and place the shift
lever in R (reverse)
2. Press the button on the control panel.
3. The screen will display the Night settings.
4. Turn the TUNE/SCROLL knob to adjust the
setting up or down.
5. Press the button again to access the
Auto settings.
6. Turn the TUNE/SCROLL knob to adjust the
setting up or down.
● Do not adjust the display settings of the Rear-
View Monitor while the vehicle is moving.
OPERATING TIPS
CAUTION
● Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration. To clean the camera,
wipe with a cloth dampened with a di-
luted mild cleaning agent and then wipe
with a dry cloth.
● Do not damage the camera as the moni-
tor screen may be adversely affected.
LHA1202
Monitor, climate, audio, phone and voice recognition systems 4-13