Installing top tether strap -33 – NISSAN 2015 Versa Note - Owner's Manual User Manual

Page 50

Advertising
background image

6. After attaching the child restraint, test it be-

fore you place the child in it. Push it from side
to side while holding the child restraint near
the LATCH attachment path. The child re-
straint should not move more than 1 inch
(25 mm), from side to side. Try to tug it
forward and check to see if the LATCH at-
tachment holds the restraint in place. If the
restraint is not secure, tighten the LATCH
attachment as necessary, or put the restraint
in another seat and test it again. You may
need to try a different child restraint. Not all
child restraints fit in all types of vehicles.

7. Check to make sure the child restraint is

properly secured prior to each use. If the
child restraint is loose, repeat steps 1
through 6.

1. Top tether strap

2. Anchor point

INSTALLING TOP TETHER STRAP

The child restraint top tether strap must be used
when installing the child restraint with the LATCH
lower anchor attachments.

First, secure the child restraint with the LATCH
lower anchors.

Forward-facing – step 6

WRS0697

2nd row bench seat

LRS2452

Safety—Seats, seat belts and supplemental restraint system

1-33

Advertising