NISSAN 2015 Versa Note - Owner's Manual - Manual (Page 227)

Choosing a language
You can interact with the Bluetooth® Hands-
Free Phone System using English, Spanish or
French.
To change the language, perform the following.
1. Press and hold the / button for
more than 5 seconds.
2. The system announces: “Press the
PHONE/SEND ( / ) button for
the hands-free phone system to enter the
voice
adaptation mode or press the
PHONE/END ( ) button to select a dif-
ferent language.”
3. Press the button.
For information on voice adaptation, see
“Voice adaptation (VA) mode” in this section.
4. The system announces the current language
and gives you the option to change the lan-
guage to Spanish (in Spanish) or French (in
French). To select the current language,
press the PHONE/SEND ( / )
button. To select a different language, tilt the
tuning switch ( or ) up or down.
NOTE:
You must press the / button
within 5 seconds to change the language.
5. If you decide not to change the language, do
not press either button. After 5 seconds, the
VR session will end, and the language will
not be changed.
Connecting procedure
NOTE:
The connecting procedure must be per-
formed when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
Main Menu
“Connect phone”
᭺
A
“Add phone”
᭺
B
Initiate from handset
᭺
C
Name phone
᭺
D
1. Press the / button on the steer-
ing wheel. The system announces the avail-
able commands.
2. Say: “Connect phone”
᭺
A . The system ac-
knowledges the command and announces
the next set of available commands.
3. Say: “Add phone”
᭺
B . The system acknowl-
edges the command and asks you to initiate
connecting from the phone handset
᭺
C .
The connecting procedure of the cellular
phone varies according to each cellular
phone model. See the cellular phone Own-
er’s Manual for details. You can also visit
www.NissanUSA.com/bluetooth
for in-
structions on connecting NISSAN recom-
mended cellular phones.
When prompted for a Passkey code, enter
“1234” from the handset. The Passkey code
“1234” has been assigned by NISSAN and
cannot be changed.
4. The system asks you to say a name for the
phone
᭺
D .
If the name is too long or too short, the
system tells you, then prompts you for a
name again.
Also, if more than one phone is connected
and the name sounds too much like a name
already used, the system tells you, then
prompts you for a name again.
4-80 Monitor, climate, audio, phone and voice recognition systems