Voice commands -91 connecting procedure -91 – NISSAN 2015 Versa Note - Owner's Manual User Manual

Page 238

Advertising
background image

2. this device must accept any interference,

including interference that may cause unde-
sired operation of the device.

IC Regulatory information

– Operation is subject to the following two con-

ditions: (1) this device may not cause interfer-
ence, and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.

– This Class B digital apparatus meets all re-

quirements of the Canadian Interference-
Causing Equipment Regulations.

BLUETOOTH® is a
trademark owned by
Bluetooth SIG, Inc.
and licensed to
Bosch.

VOICE COMMANDS

You can use voice commands to operate various
Bluetooth® Hands-Free Phone System features
using the NISSAN Voice Recognition system. For
additional information, refer to “NISSAN Voice
Recognition System” in this section.

Voice Prompt Interrupt

While using the voice recognition system, the
system voice can be interrupted to allow the user
to speak commands. While the system is speak-
ing, press the

button on the steering

wheel. The system voice will stop and a tone will
be heard. After the tone, speak desired command
(displayed on the touch-screen).

One Shot Call

To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example, press
the

button and after the tone say, “Call

Redial”.

CONNECTING PROCEDURE

NOTE:

The connecting procedure must be per-
formed when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.

1. Press the [

] button on the control

panel.

2. Touch the “Settings” key.

3. Touch the “Phone & Bluetooth” key.

4. Touch the “Connect New Device” key.

LHA2773

Monitor, climate, audio, phone and voice recognition systems

4-91

Advertising