Jeppesen FliteDeck 3 - Manual (Page 188)

Emergency Page
191
To go direct to an airport on the Emergency page, double-click the airport you want
in the Select Emergency Airport list, or press the FUNCTION KEY for it. You can
also double-click the airport call-out box on the enroute chart.
• This immediately displays a direct route to the selected airport with a
magenta line in the chart view.
• The selected airport becomes the active waypoint and the Enroute Nav page
displays navigation information to the airport.
• The selected airport becomes the Chosen Airport on the Terminal page where
you can bring up any subscribed IFR/VFR charts for that airport immediately.
• Like any direct route, an emergency route is temporary, and cannot be saved.
The emergency route does not replace the route on your Plan page. To
resume navigation along the route on your Plan page, select a waypoint in the
route and click/tap Set Active Waypoint.