Jeppesen FliteDeck 3 - Manual (Page 62)

FliteDeck Basics
65
2. In the entry box that appears, enter an airport identifier, name, or partial
ident or name. Enter at least three letters.
1.
NOTE
The RESET AIRPORTS button clears the airports from all
four clipboards.
3. All the matching airports in your coverage appear in the SELECT AIRPORT list.
To select the airport you want, complete the entry, or click on the name in
the list.
If the airport you want is not in this list, clear the entry box and start a new
search. The CLR button to the right of the text entry box removes the entry,
or you can use the keyboard BACKSPACE key.