Jeppesen FliteDeck 3 - Manual (Page 74)

FliteDeck Setup
77
Use the GPS tab to set up your GPS for use with FliteDeck or to enable the GPS
simulator trainer.
• Select No Position Information if you intend to use FliteDeck for terminal
chart viewing only and will not be connecting a GPS or using the GPS
simulator. Selecting this option hides pages and navigational information
features that need positional information in order to work properly. The
hidden pages and features include:
o
The Emergency Page
o
The Flight Information Blocks
o
The Supplemental Track Indicator (STI)
NOTE
To enable the hidden features, select >Use simulator or GPS
Connected.
• Select Use simulator to enable the GPS simulator trainer. A GPS Sim Trainer
Control box (see Learning FliteDeck with the GPS Simulator Trainer ) floats
over FliteDeck when you start the program, enabling you to learn how to use
the program on the ground. This option is not recommended for use in-flight.
• Select GPS Connected to use an actual GPS with FliteDeck.