To exit remote start mode and drive the vehicle, Remote start comfort systems — if equipped – Dodge 2013 Journey - Owner Manual User Manual

Page 31

Advertising
background image

• For security, power window and power sunroof

operation (if equipped) are disabled when the vehicle
is in the Remote Start mode.

• The engine can be started two consecutive times (two

15-minute cycles) with the RKE transmitter. However,
the ignition must be cycled to the RUN position before
you can repeat the start sequence for a third cycle.

To Exit Remote Start Mode Without Driving The
Vehicle

Press and release the REMOTE START button one time or
allow the engine to run for the entire 15 minute cycle.

NOTE:

To avoid unintentional shutdowns, the system

will disable the one time press of the REMOTE START
button for two seconds after receiving a valid Remote
Start request.

To Exit Remote Start Mode And Drive The Vehicle

Before the end of 15 minute cycle, press and release the
UNLOCK button on the RKE transmitter to unlock the
doors and disarm the Vehicle Security Alarm (if equipped).
Then, prior to the end of the 15 minute cycle, press and
release the START/STOP button.

NOTE:

The message “Push Start Button” will display in

the EVIC until you push the START button.

Remote Start Comfort Systems — If Equipped

When remote start is activated, the driver heated seat
feature will automatically turn on in cold weather. This
feature will stay on through the duration of remote start
or until the ignition switch is turned to the ON/RUN
position.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

29

Advertising