Special additives, Fluid level check – 2.4l engine – Dodge 2013 Journey - Owner Manual User Manual

Page 557

Advertising
background image

CAUTION!

Using a transmission fluid other than the manufac-
turer’s recommended fluid may cause deterioration
in transmission shift quality and/or torque converter
shudder, and will require more frequent fluid and
filter changes. Refer to “Fluids, Lubricants, and
Genuine Parts” in “Maintaining Your Vehicle” for
fluid specifications.

Special Additives

The manufacturer strongly recommends against using
any special additives in the transmission.

Automatic Transmission Fluid (ATF) is an engineered prod-
uct and its performance may be impaired by supplemental
additives. Therefore, do not add any fluid additives to the
transmission. The only exception to this policy is the use of
special dyes for diagnosing fluid leaks. Avoid using trans-
mission sealers as they may adversely affect seals.

CAUTION!

Do not use chemical flushes in your transmission as
the chemicals can damage your transmission compo-
nents. Such damage is not covered by the New
Vehicle Limited Warranty.

Fluid Level Check – 2.4L Engine

Use the following procedure to check the transmission
fluid level properly:

1. Park the vehicle on level ground.

2. Run the engine at normal idle speed for at least

60 seconds, and leave the engine running for the rest
of this procedure.

3. Fully apply the parking brake, and press the brake

pedal.

7

MAINTAINING YOUR VEHICLE

555

Advertising