Fluid and filter changes, Rear drive assembly (rda) – awd models only, Lubricant selection – Dodge 2013 Journey - Owner Manual User Manual

Page 560: Fluid level check, Frequency of fluid change, Power transfer unit (ptu) – awd models only, Rear drive assembly (rda), Awd models only, Power transfer unit (ptu)

Advertising
background image

Fluid And Filter Changes

Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

In addition, change the fluid and filter if the transmission
is disassembled for any reason.

Rear Drive Assembly (RDA) – AWD Models Only

Lubricant Selection

Use only the manufacturer’s recommended fluid. Refer
to “Fluids, Lubricants, and Genuine Parts” in “Maintain-
ing Your Vehicle” for further information.

Fluid Level Check

Visually inspect the unit at each oil change for leakage. If
leakage is detected, check the fluid level by removing the
fill plug. The fluid level should be maintained between the
bottom of the fill hole to 1/8 in (4 mm) below the fill hole.

Add fluid, if necessary, to maintain the proper level.

Frequency Of Fluid Change

Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

Power Transfer Unit (PTU) – AWD Models Only

Lubricant Selection

Use only the manufacturer’s recommended fluid. Refer
to “Fluids, Lubricants, and Genuine Parts” in “Maintain-
ing Your Vehicle” for further information.

Fluid Level Check

Visually inspect the unit at each oil change for leakage. If
leakage is detected, Check the fluid level by removing the
fill plug. The fluid level should be maintained between the
bottom of the fill hole to 1/8 in (4 mm) below the fill hole.

Add fluid, if necessary, to maintain the proper level.

558

MAINTAINING YOUR VEHICLE

Advertising