Keyless enter-n-go, Normal starting, Using the engine start/stop button – Dodge 2013 Journey - Owner Manual User Manual

Page 395

Advertising
background image

Keyless Enter-N-Go™

This feature allows the driver to oper-
ate the ignition switch with the push
of a button, as long as the Remote
Start/Keyless Enter-N-Go™ FOBIK is
in the passenger compartment.

Normal Starting

Using The ENGINE START/STOP Button

1. The transmission must be in PARK or NEUTRAL.

2. Press and hold the brake pedal while pressing the

ENGINE START/STOP button once.

3. The system takes over and attempts to start the

vehicle. If the vehicle fails to start, the starter will
disengage automatically after 10 seconds.

4. If you wish to stop the cranking of the engine prior to

the engine starting, press the button again.

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

To Turn Off The Engine Using ENGINE
START/STOP Button

1. Place the shift lever in PARK, then press and release

the ENGINE START/STOP button.

2. The ignition switch will return to the OFF position.

5

STARTING AND OPERATING

393

Advertising