Rear turn signal and backup lamp, Changing the rear turn signal lamp – Dodge 2013 Journey - Owner Manual User Manual

Page 578

Advertising
background image

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.

4. Install the replacement bulb and connector assembly

straight into the fog lamp until it locks into place.

5. Reinstall the front lower wheel well access panel and

fasteners.

Rear Turn Signal And Backup Lamp

The taillamps are a two-piece design. The tail/stop/rear
turn signal lamps are located in the rear corner body
panels. The tail and backup lamps are located in the
liftgate.

Changing The Rear Turn Signal Lamp

1. Open the liftgate.

2. Remove the two fasteners from the inboard side of the

taillamp housing.

576

MAINTAINING YOUR VEHICLE

Advertising