Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 102)

CSX400 Configuration with QuickSET
88 CSX400 and CSX400-DC User’s Guide
Wide Area Synchronous Configuration Window
The Wide Area Synchronous configuration window shown in Figure 30 displays after clicking on
the Next>> button in either the Ethernet 1 and 2 configuration window or the Wide Area Frame
Relay Time Slot and PPP configuration windows, depending on whether you have installed one or
two WPIMs in the CSX400, and in what order you are configuring them.
This section explains how to configure the CSX400 Synchronous WAN port using QuickSET.
Figure 30 Wide Area Synchronous Configuration Window
NOTE
The service provider (i.e., AT&T, Sprint, MCI, etc.) determines the settings for the
following fields. Consult the service provider for the correct settings.