Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 205)

MIB Navigator
CSX400 and CSX400-DC User’s Guide 191
Example:
defroute:
Syntax: defroute [interface number] [IP address]
Description: The defroute command allows you to set the default IP route to a
managed device through the specified interface.
Options: Not Applicable
Example:
dhcp:
Syntax: dhcp <options>
Description: The dhcp command provides a status of the Dynamic Host Configuration
Protocol feature. Allows the user to enable/disable DHCP globally and
by interface, and to configure interfaces with server parameters.
Options: dhcp (with no options) Displays DHCP status information.
dhcp enable/disable. Enables or disables the DHCP feature globally.
dhcp <IFNUM> enable disable Enables or disables the DHCP feature
by interface.
MIBNav-> arp -a
# Interface
# (SonicInt)
# (SonicInt)
# (SonicInt)
# (SonicInt) Network Address
122.144.40.111
122.144.48.109
122.144.52.68
122.144.21.43 Physical Address
00.00.0e.12.3c.04
00.00.0e.f3.3d.14
00.00.0e.12.3c.04
00.00.0e.03.1d.3c Media Type
3(dynamic)
3(dynamic)
3(dynamic)
3(dynamic)
MIBNav-> arp -d 1 122.144.52.68
MIBNav-> arp -s 1 22.44.2.3 00:00:0e:03:1d:3c
051467
MIBNav-> defroute 2 147.152.42.32
051469