Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 124)

CSX400 Configuration with QuickSET
110 CSX400 and CSX400-DC User’s Guide
Remote MAC Address — Displays the remote Ethernet MAC address. Use this field to enter the
remote MAC address of the device on the other end of the WAN link.
Apply Changes — Use this button to add the configured Host Map entry to the IPX Host Map
list.
Add Host/Delete Host — These buttons allow you to add or delete a host and to configure the
CSX400 to forward only those packets from the specified host. Use these buttons to add or delete
an entry in the Host Map.
When you have finished making changes, click on the Apply Changes button. Click the OK
button to exit the Host Map window and return to the (IP/IPX) Routing Configuration window.
Once your CSX400 configuration is complete, click on the Save button to save any configuration
changes you have made. The Congratulations window displays. Click on the OK button to exit
QuickSET.