Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 175)

General Configuration Using Local Management
CSX400 and CSX400-DC User’s Guide 161
5. Use the ENTER key to toggle the entry to ENABLED.
6. Use the arrow keys to highlight the SAVE command field at the bottom of the screen, and then
press ENTER. The message “SAVED OK” displays.
Figure 67 IP RIP Configuration Screen
IP RIP CONFIGURATION
System Level RIP-1:
Port Level RIP-1:
RETURN SAVE +PORT-
DISABLED
DISABLED
IP Address: xxx.xxx.xxx.xxx
Port: 1
CSX400 Local Management Flash Image Version XX.XX.XX