Dell LCD TV W4200 - Manual (Page 27)

Using the On-Screen Display
27
FILE LOCATION: C:\Documents and Settings\solinak\Ƈ¦±\OM update\ch4e.fm
DELL CONFIDENTIAL – PRELIMINARY 10/8/04 – FOR PROOF ONLY
www
.dell.com | support.dell.com
DIGITAL TV — Select when you have your antenna connected to the ATSC connector. See "Bottom View"
on page 7 for the location of the ATSC connector. (for W4200HD only)
AV1 (COMPONENT 1) — Select when you have a video device, such as a DVD player, set-top box, or cable
TV box, connected to the component audio and video connectors on the bottom of the TV. See "Bottom
View" on page 7 for the location of the component audio and video connectors.
AV2 (COMPONENT 2) — Select when you have a video device, such as a DVD player, set-top box, or cable
TV box, connected to the component audio and video connectors on the bottom of the TV. See "Bottom
View" on page 7 for the location of the component audio and video connectors.
AV3 (S-VIDEO 1) — Select when you have a video device, such as a VCR, connected to the S-Video
connector on the bottom of the TV display. See "Bottom View" on page 7 for the location of the S-Video
connector.
AV4 (S-VIDEO 2) — Select when you have a video device, such as a VCR, connected to the S-Video
connector on the bottom of the TV display. See "Bottom View" on page 7 for the location of the S-Video
connector.
AV5 (COMPOSITE 1) — Select when you have a video device, such as a video game system, connected to the
composite connector on the bottom of the TV display. See "Bottom View" on page 7 for the location of the
composite video and audio connectors.
AV6 (COMPOSITE 2) — Select when you have a video device, such as a video game system, connected to the
composite connector on the bottom of the TV display. See "Bottom View" on page 7 for the location of the
composite video and audio connectors.
AV7 (COMPOSITE 3) — Select when you have a video device, such as a video game system, connected to the
composite connector on the side of the TV display. See "Right View" on page 6 for the location of the
composite connector.
AV8 (S-VIDEO 3) — Select when you have a video device, such as a VCR, connected to the S-Video
connector on the side of the TV display. See "Right View" on page 6 for the location of the S-Video
connector.
SHOW INPUTS — Show Inputs allows you to select Active or All. Active searches for which connectors are
being used. The available input sources appear in white and input sources that are not available appear in
grey. All shows all the input sources and allows you to select all the input sources even if you do not have a
device connected.
NOTE:
In OSD Settings, located in the Setup menu, you can set the Input Select to display the device that
you have attached. For example, AV2 would say DVD when you view the Input Select menu.
DZ101_eUM.book Page 27 Friday, October 8, 2004 2:25 PM