Dell LCD TV W4200 - Manual (Page 38)

38
Troubleshooting Problems With Your TV
www
.dell.com | support.dell.com
FILE LOCATION: C:\Documents and Settings\solinak\Ƈ¦±\OM update\ch5e.fm
DELL CONFIDENTIAL – PRELIMINARY 10/8/04 – FOR PROOF ONLY
OSD Messages
While using your TV display, the following messages may appear.
Remote Control Problems
Message Possible Solution
Auto Adjust No action required, the TV display is performing an auto
adjustment.
Out of Range Check the optimal resolution settings.
You may need to download a new video driver. For more
information, go to support.dell.com.
No Video Input 1 Check all cables are properly connected.
2 Ensure the proper source is selected. See "Input Select" on page 26
for more information.
TV Button Lock To unlock, press Menu on your remote control, select Setup.
Self Test Appears for computer source when there is nothing plugged in.
Select VGA or DVI from Input Select menu and nothing is plugged
in. Plug a computer in to the VGA or DVI connector.
Problem Possible Solution
The TV display does not respond
when using the remote control 1 Point the remote control directly at the lower right corner of the
TV display. Be sure that nothing is blocking the front of the TV
display. For the location of the IR, see "Front View" on page 5.
2 Verify that the batteries are properly installed.
3 If the batteries are old, install new batteries.
NOTE:
Bright lights or other infrared devices may interfere with your
remote control and IR on the TV display.
DZ101_eUM.book Page 38 Friday, October 8, 2004 2:25 PM