Cisco SFS 7008 - Manual (Page 61)

61
Note: all node cards in the must have an oper-status of “up” for the upgrade to be effective.
a.
Select Maintenance > File Management
b. Click the new .img file and click the Install button.
c.
Click Yes when prompted.
Figure 4-6: Watching the File Copy Progress
d. Click Ok when the Image Install Completed Successfully message appears.
5. Configure the image for the next boot:
a. Select Maintenance > Boot Config
b. Select the new image from the Image Source drop-down menu and click the Apply button.
Figure 4-7: Set the Boot Config