Dimensions, Connections, Leds – Cisco SFS 7008 User Manual

Page 16: Power supplies, Dimensions connections leds power supplies

Advertising
background image

16

Figure 1-4: Chassis Slot Numbering in Back (Service Side)

Dimensions

Height: 6U unit

Width: 17.04”

Depth: 8” - 23.7”

Weight: maximum 106 pounds (full chassis configuration with 4x copper Line Interface Modules)

Connections

96 ports of 10 Gbps 4X Copper InfiniBand.

Two 10/100 Ethernet RJ-45 Management-Ethernet ports for out-of-band management.

Two RJ-45 Console Port used to configure and monitor the Topspin 270.

Rack Alarm.

All cabling is on the rear of the chassis.

LEDs

LEDs are located on both the front and back of the chassis. Refer to

“Interpreting the Front Panel

LEDs” on page 65

and

“Interpreting the Back Panel LEDs” on page 71

for more information.

Power Supplies

Refer to

“Installing a New Power Supply Module” on page 38

for installation instructions.

The Topspin 270 has two AC-DC bulk power supply modules.

Only one power supply, in either of the two slots, is required to power the system. However, a
blanking panel is required for any unused bay.

Slot # 15

Slot # 16

Slot # 17

Slot # 1

Slot # 2

Slot # 3

Slot # 4

Slot # 5

Slot # 6

Slot # 7

Slot # 8

Advertising