Dell PowerEdge Rack Enclosure 4020S - Manual (Page 10)

8
Installation Guide
Recommended Tools and Supplies
You may need the following tools and supplies to install the rack:
• #2 Phillips cross-tip screwdriver
• Flat head screwdriver
• 12 mm wrench
• 10 mm wrench (for reversing the front door)
• T20 Torx screwdriver (for reversing the front door)
• T30 Torx screwdriver (for reversing the front door)
• Keys to the rack doors and side panels
• 6 mm Allen wrench
• Adjustable wrench (for removing the rack from the pallet)
Installing Rack Cabinets
Installing a rack cabinet may involve:
1 Opening and closing the front rack door
2 Removing and replacing the rack doors
3 Removing and replacing the side panels
4 Installing the brushes
5 Removing and replacing the extension service cover
6 Removing and replacing the extension
7 Reversing the front door
8 Securing the rack leveling feet
9 Installing the rack stabilizer feet
10 Adjusting the rear rack posts
11 Routing cables
12 Coupling two racks