Dell PowerEdge Rack Enclosure 4020S - Manual (Page 27)

Installation Guide
25
5 Flip the hinges and secure them on the opposite side of the extension
using screws and nuts. See Figure 12.
The two hinges at the top have the number
1 marked on them and the
bottom two hinges have the number 2 marked on them.
NOTE:
The orientation of the number 1 is right-side up and the orientation of
the number 2 is upside down.
NOTE:
Each hinge is secured to the extension using only one screw and all
the screws are installed in the top hinge hole.
Figure 12. Installing the Hinges on the Extension
1 hinges (4) 2 screws and nuts (4 each)
1
2