Reversing the front door (optional) – Dell PowerEdge Rack Enclosure 4020S User Manual

Page 23

Advertising
background image

Installation Guide

21

Replacing the Extension

To replace the extension, perform the steps for removing the extension in the
reverse order.

Reversing the Front Door (Optional)

To reverse the direction that the front door opens, complete the following steps:

1 Remove the front door. See "Removing the Front Door" on page 9.
2 Using a T30 Torx screwdriver and a 10 mm wrench, remove the screws that

secure the hinges to the extension. See Figure 9.

The top two hinges have the number

1 marked on them and the bottom

two hinges have the number

2 marked on them.

NOTE:

The orientation of the number 1 is upside down and the orientation of

the number 2 is right-side up.

NOTE:

While removing the screws, collect the loose nuts from the inside of

the extension.

NOTE:

Each hinge is secured to the extension using only one screw and all

the screws are installed in the lower hinge hole.

Advertising