Dell C/Dock II Expansion Station - Manual (Page 13)

S y s t e m I n f o r m a t i o n G u i d e 11
When you dock the computer to the docking device and turn the computer
on, the green power light on the docking control base lights up (see
“Docking Control Base Controls and Indicators”).
NOTICE: To avoid losing data , save any open files before you dock the
computer.
NOTICE: If a Peripheral Component Interconnect (PCI) video card is
installed in the docking device , shut down the computer before docking or
undocking to avoid losing data.
1 Save all files, close and exit all application programs, exit the operating
system, and turn off the computer.
NOTICE: To avoid damaging the docking connector , open the docking panel
door before you attempt to dock the computer to the docking device.
2 If the computer has a docking panel door, open the docking panel door
on the back of the computer.
D o c k i n g P a n e l D o o r o n t h e C o m p u t e r
3 If you are using the docking device with a monitor stand, close the
computer display.
4 Ensure that the eject/locking lever is in the unlocked position.
docking panel door
(not on all computers)
computer