Dell C/Dock II Expansion Station - Manual (Page 20)

18 S y s t e m I n f o r m a t i o n G u i d e
www
.dell.com | support.dell.com
Undocking the Computer
NOTICE: If the computer does not have power from a battery , the computer
turns off when you undock it , and you will lose all unsaved data.
NOTICE: Never undock the computer without first preparing the computer. If
you undock before preparing the computer , you will lose data and the computer
may not recover normal operation for several minutes , if at all.
To prepare the computer for undocking, perform one of the following:
• Press <Fn><Esc> on the computer's keyboard
(or <Scroll Lock><Esc> on an external keyboard).
Wait a few seconds for the power light on the computer to turn off.
• In Windows XP, click the Start button, and then click Undock
Computer.
In Windows 95, Windows 98, Windows Me, or Windows 2000, click the
Start button, and then click Eject PC.
In Windows NT, click the docking icon on the taskbar, and then click
Undock to place the computer in suspend mode.
Wait a few seconds for the power light on the computer to turn off.
eject/locking
lever