Dell C/Dock II Expansion Station User Manual
Page 15
S y s t e m I n f o r m a t i o n G u i d e
13
Docking for the First Time With Windows XP and Windows 2000
1
Dock and turn on your computer.
2
Press <F2> during the system boot routine to view the system setup
program.
3
Set Docking IRQ to Optimized.
4
Set Universal Connect to Enabled.
5
Exit the system setup program.
Your system will continue the boot process.
In Windows 2000, the Add New Hardware Wizard appears.
NOTE: In Windows XP, the operating system automatically installs the drivers
in the background. In Windows 2000, the Add New Hardware Wizard
automatically installs your drivers.
NOTE: In Windows XP and Windows 2000, to reinstall drivers or ensure the
best drivers are installed, see “Updating Drivers in Windows XP, Windows
2000, or Windows Me” later in this document.
Docking for the First Time With Windows Me
1
Dock and turn on your computer.
2
Press <F2> during the system boot routine to view the system setup
program.
3
Set Docking IRQ to Optimized.
4
Set Universal Connect to Enabled.
5
Exit the system setup program.
Your system will continue the boot process.
The Add New Hardware Wizard appears.
6
Select Search for the Best Driver for Your Device (Recommended)
and click Next.
7
Click Next.
8
Follow the prompts on the Add New Hardware Wizard.
9
Whenever prompted, select Search for the Best Driver for Your
Device (Recommended) and click Next.