Canon MF5550 - Manual (Page 72)

LCD Messages 7-2
T
roub
leshooting
7
CLEAR ADF
↔ DOCUMENT TOO LONG
Cause The document is longer than 14" (356 mm), or is not feeding correctly.
Remedy Reduce the length of the document to within 14" (356 mm), and then re-send it.
INCORRECT PAPER SIZE
↔ CASS PAPER MISMATCH
Cause The size of the paper in the cassette or multi-purpose feeder is different from
that of the paper specified in <PAPER SIZE> in <COMMON SETTINGS> of the
Menu.
Remedy 1 Load the correct paper size or change <PAPER SIZE> in <COMMON
SETTINGS> of the Menu. For more information, see the following:
• Chapter 2, "Paper Handling," in the Basic Guide
• Chapter 5, "Copying," in the Basic Guide
Then reset the machine by opening the front cover and then closing it.
Remedy 2 If you are trying to print a report or list, set the paper size setting to LTR, LGL, or
A4 and load paper of the same size. The report or list will then be printed
automatically.
LOAD LTR SIZE PAPER
Cause No LTR-size paper is loaded in the cassette or multi-purpose feeder.
Remedy Load LTR-size paper in the cassette or multi-purpose feeder. (See Chapter 2,
"Paper Handling," in the Basic Guide.
MEMORY FULL
PRESS SET KEY
Cause The memory becomes full during the document scanning, copying, sending, or
receiving the fax.
Remedy When sending the document, divide it into a few parts or select a lower fax
resolution.
If you need more space, wait for the machine to send any remaining faxes.
If <MEMORY FULL> and <PRESS SET KEY> appear while scanning
documents using the ADF, the document being scanned stops in the ADF.
Press [Set] to make the document come out automatically.