Canon MF5550 - Manual (Page 90)

Menu Descriptions 8-6
Machine Settings
8
OUTPUT YES Prints a report every time you receive a
document.
3. ACTIVITY REPORT Enables/disables automatic printing of a
transaction report after every 20 transactions.
AUTO PRINT ON Prints a report automatically after every 20
transactions.
AUTO PRINT OFF No ACTIVITY REPORT is printed.
TX SETTINGS Sets the transmission functions.
1. PAUSE TIME Sets the length of the pause you insert into a
dialing sequence.
1SEC to 15SEC (2SEC)
2. AUTO REDIAL Sets whether to perform automatic redial when
the other line is busy or no answer.
ON Customizes the redial operation.
1. REDIAL TIMES Sets the number of retries.
1TIMES to 8TIMES (2TIMES)
2. REDIAL INTERVAL Sets period of time between redialings.
2MIN. to 99MIN. (2MIN.)
OFF After the first attempt at dialing fails, redialing is
not attempted.
3. TX START SPEED Sets the transmission speed for all documents
you send.
33600bps/14400bps/9600bps/7200bps/4800bps/
2400bps
RX SETTINGS Sets the reception functions.
1. DRPD: SELECT FAX Selects the ring pattern for fax calls.
DOUBLE RING, TRIPLE RING, NORMAL RING
2. INCOMING RING Sets how many rings the machine waits for before
it receives faxes when the machine is set to <FAX
ONLY MODE>.
RING COUNT Specifies the number of incoming rings before the
machine receives faxes.
2TIMES to 11TIMES (2TIMES)
3. MAN/AUTO SWITCH Sets whether the machine switches to the
document receive mode after the connected
extension telephone rings for a specified length of
time in the manual receive mode.
Name Descriptions