Vertical Communications 8412S - Manual (Page 58)

•
To retrieve a line from hold and bring that party back into the
conference,
1. Press TRANSFER/CONFERENCE.
2. Press line button.
3. Press TRANSFER/CONFERENCE.
NOTE: If all the conference circuits are busy, you will not be able to
add a party to the conference.
•
To drop out of a conference call you initiated involving outside lines
(creating an unsupervised conference),
1. Dial # (lines remain lighted and in use until one or both outside
parties disconnect; when only one party drops out of an
unsupervised conference, the other party remains on hold until he
hangs up or the line is answered).
•
To rejoin an unsupervised conference between two outside lines,
1. Press TAP.
NOTE: Conference volume levels depend upon the quality of the
external lines.
•
To drop a party out of a conference call,
1. Press DROP PARTY.
2. Select the party you wish to drop from the conference call by
pressing the interactive button beside the appropriate line.
6 – 2 Large Screen Speakerphone Manual
Conferencing Calls GCA70–349