Vertical Communications 8412S - Manual (Page 74)

7.17 Switching The Dialing Mode
Between Pulse And Tone
If the telephone service in your locality is pulse (rotary dialing), the
installer arranges your telephone to dial in this manner. If you need to
send tones during a dialing sequence (for example, to send
bank-by-telephone tones), you can convert to tone dialing mode while
dialing. The system will switch back to pulse dialing when you end your
call.
You can store a # as part of a speed dial number to cause an automatic
switch from pulse to tone where needed in a number sequence.
•
To convert to tone dialing at any time during dialing or while on an
active call,
1. Press #.
7.18 Using Background Music
If the telephone system supplies background music, you can turn it on at
your LCD speakerphone while it is on-hook and idle. The system
automatically turns background music off during calls and voice
announcements.
•
To turn the music on or off,
1. Press OPTIONS then press PROGRAMMING.
2. Press NEXT until the BACKGROUND MUSIC option appears.
3. Press the BACKGROUND MUSIC button (to the right of the
LCD) to select music source 1, music source 2, or OFF.
4. Press EXIT.
5. If you have turned music on, adjust music volume with the
volume buttons.
7 – 16 Large Screen Speakerphone Manual
Using The Other Telephone Features GCA70–349