Canon DR-2580C - Manual (Page 11)

Before Using the Scanner 7
Chapter 1
Power
• Connect only to a power outlet of the rated voltage and power supply
frequency. (either 120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your
region)
• Do not use a power supply that is not rated for the specified voltage. Doing
so might cause fire or electric shock.
• Do not connect other electrical equipment to the same power outlet to which
the scanner is connected. Also, when using an extension cord, make sure that
the extension cord is rated for the current requirements of the scanner.
• Never try to disassemble the AC adapter or modify it in any way, as this is
extremely dangerous.
• The power cord and AC adapter may become damaged if they are often
stepped on or if heavy objects are placed on them. Continued use of a
damaged power cord and AC adapter can lead to an accident, such as a fire
or electrical shock.
• Do not use the power cord while it is coiled.
• Do not pull directly on the power cord. When disconnecting the power cord,
grasp the plug and remove it from the outlet.
• Keep the area around the power plug clear of objects so that the power cord
can be disconnected easily in an emergency.
• Use only the AC adapter provided with this scanner. Also, do not use the AC
adapter provided with the scanner with any other electrical devices.
Model: MG1-4315
• If you have any questions regarding the power supply, contact your local
authorized Canon dealer or service representative for further information.
Moving the Scanner
• When moving the scanner, always hold it with both hands to avoid dropping
it. The scanner weighs approximately 3.9 lb (1.8 kg) alone, and
approximately 7.9 lb (3.6 kg) with the optional flatbed scanner unit installed.
• Make sure that the flatbed scanner unit is correctly attached to the
DR-2580C scanner before moving the scanner.
With Optional Flatbed
Scanner Unit Installed