Canon DR-2580C - Manual (Page 64)

60 Using the Scanner
Prescan Function
• I want to preview the image before I scan it
Check the [Prescan] checkbox.
When scanning starts, a single page of the document is scanned so you can
check the image in the preview window displayed on the scanning panel.
See “ISIS Driver Settings j,” on p. 62, and “TWAIN Driver Settings i,”
on p. 64.
Registering Settings
• I want to use preset scanning conditions again
Assign a name to the scanning conditions and register them as a user
preference. If you select the name of an already registered user preference,
the conditions you set overwrite the settings of the selected user preference.
See “ISIS Driver Settings a,” on p. 62, and “TWAIN Driver Settings a,”
on p. 64.
Flatbed Scanning (Option)
• I want to scan on the flatbed
Set the “Scanning Side” setting to [Flatbed] or [Auto]. When Scanning Side
is set to [Auto], the document on the [Flatbed] is scanned when there is no
longer a document in the document feed opening.
If the flatbed unit is not connected, [Flatbed] and [Auto] do not appear
in the “Scanning Side” settings.
See “ISIS Driver Settings g,” on p. 62, and “TWAIN Driver Settings g,”
on p. 64.